Top » Catalog »

€129.00 €99.00

Universal 18 in 1 adjustable golfclub

<b>Universal 18 in 1 adjustable golfclub</b>

The Universal golf club is different from other adjustable golf clubs available today. The teeth are set at 3.3 degrees to allow for more accurate loft settings than other adjustable golf clubs. The axis of the Universal Golf Club is set at anangle from the sole to provide the correct lie angle for each club selected. The locking lever is hidden behind the shaft. The over sized head allows for a larger sweet spot.


The Universal club has a .500 offset shank that is set at an angle to the sole. This provides the correct lie angle for each club. The sole is utilized as a precision machined flat putter face. There are 4 usable lofts with the correct lie angle for putting. In addition this club can be used for most left hand shots. The advantages are a more consistent swing, saving fossil fuel, healthy exercise, traveling light, executive and par 3 use, a second set of clubs and most of all to save money. This club is absolutely fair and takes the game back to its roots, where skill is the most important factor.

The Universal Club is set to provide the correct loft and lie angles for each club selected. The oversized head provides for a larger sweet spot area. A Stainless Steel locking lever locks the head solid and is hidden at address. All of these features and still at D-2 Swing-weight!.

The Universal Club is from the inventor of the Superstick golf club, Patented in 1974 by Donald Moore, with over 100,000 sold. This club is different from other adjustable golf clubs.The loft change between clubs is 3.3 degrees. This change is within 1 degree of the golf industry average for iron and wedge lofts.

Turn the locking lever 6 turns. Set the shank socket in a different position on the hex coupling nut. (Align the i line and a lower hour number on the coupling nut). Turn the lever back to lock. The lever should be vertical with the shaft, if not, move the shank socket to another position on the coupling nut. (Lower your number if lever tightens past shaft.) Once you understand this, it only takes a few seconds to change the locking lever position. After breaking in, the only time you will need to adjust the lever is after disassembly for cleaning.

Travel shaft
To extend and lock shaft, hold the grip end in your right hand and the head in your left hand and snap open firmly. To shorten for travel, hold shaft near the head and tap firmly on a hard surface (concrete). Place shaft on shank taper to lock. To lock the shaft open it must be clean. Just a little water and twisting action against each step is all that's needed to maintain a solid lock on the shaft. No oil, Rinse well.

Just use water. No oil or lubricant is needed. All head parts are Stainless Steel. Do not use oil or wax on the shaft, just soap and water and rinse well, then dry.

We Accept
0 items
Share Product
Share via E-Mail
Quick Find
Use keywords to find the product you are looking for.
Advanced Search